199003097 - P1607 Lambda sensor control circuit
 | This error is detected if the electronic control unit detects a malfunction using the lambda sensor internal evaluation logic. |
| Test results | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Check visually for leaks or restrictions in the exhaust system.Also check that the lambda sensor shows no signs of wear/faults. | Move on to Step 1 | Leaks or restrictions are detected in the exhaust circuit | Repair or if necessary replace the faulty components | |
| Faults are present in the lambda sensor | Replace the Lambda sensor Op. 1080B90 LAMBDA SENSOR - R.R. | |||
| 1 | CHECK FOR THE PRESENCE OF ERRORS | All OK | Problems encountered | Operation |
| Select the following system on the diagnostic equipment: Bosch diesel injection control unit EDC16C39 CF4/EOBD CAN (EP engine 1.9).Check that none of the following errors is present:- P0135- P1131- P1140- P1607- P1611- P2231 | End of diagnosis | Error P0135 present | Continue as instructed in the See Test 1080BI CHECK THE OPERATION OF THE LAMBDA SENSOR HEATER | |
| Error P1131 is present | Continue as instructed in the See Test 1080BA UPSTREAM LAMBDA SENSOR OPERATION CHECK | |||
| Error P1140 is present | Continue as instructed in the See Test 1080BA UPSTREAM LAMBDA SENSOR OPERATION CHECK | |||
| Error P1607 is present | Continue as instructed in the See Test 1080BA UPSTREAM LAMBDA SENSOR OPERATION CHECK | |||
| Error P1611 is present | Continue as instructed in the See Test 1080BA UPSTREAM LAMBDA SENSOR OPERATION CHECK | |||
| Error B2231 is present | Continue as instructed in the See Test 1080BI CHECK THE OPERATION OF THE LAMBDA SENSOR HEATER | |||