199003104 - P2112 Motorised throttle

This error is detected if the control unit recognizes a mechanical malfunction of the modifying flow valve by means of the internal evaluation logic.
Test results
1THROTTLE CASING CHECKAll OKProblems encounteredOperation
Remove the throttle casing actuator    Op. 1060G50 THROTTLE BODY - R.R and check that there are no foreign bodies preventing movement between 26 and 90°Move on to Step 2Foreign bodies detected as presentRemove the foreign bodies and check that the actuator is working properly. If the latter is too spoilt, replace it    Op. 1060G50 THROTTLE BODY - R.R
2CLEANING THROTTLE CASINGAll OKProblems encounteredOperation
Check that the inside of the throttle casing actuator duct is not dirty/fouled in such a way as to prevent correct movementMove on to Step 3Excessive fouling/dirtinessClean the dirty areas with a small paintbrush soaked in diesel fuel.
Avoid submerging the throttle casing because the internal electrical components could be damaged
3THROTTLE CASING REPLACEMENTAll OKProblems encounteredOperation
Replace the throttle casing actuator    Op. 1060G50 THROTTLE BODY - R.R End of diagnosis--