5520B10 STARTER MOTOR - R+R - Fiat - GRANDE PUNTO - eLearn

199000102 - 5520B10 STARTER MOTOR - R+R

) - Position the vehicle on a lift.- Open the bonnet.1. Working from the left side of the engine, unscrew the upper starter motor bolt.

- Raise the vehicle.1. Open the protective cover for the starter motor electrical connections.2. Undo the nut.3. Disconnect the electrical connections (3a, 3b) from the starter motor.

Description	Component
STARTER MOTOR	See A020 STARTER MOTOR

4. Unscrew the lower starter motor bolt.5. Remove the starter motor.

Refitting ( Removing

) - Check that the starter motor is not damaged.1. Place the starter motor in position.2. Screw in the lower starter motor bolt and tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Starter motor	Bolt	M8	2.25 ÷ 2.75

3. Connect the electrical connections for the starter motor, tighten the nut and close the protective cover.

Component	Fastening	dia	Value (daNm)	Validity
Positive lead (+30) on starter motor	Nut	M8	0.7 ÷ 1.1

- Lower the vehicle.- Screw in the upper starter motor bolt.

Component	Fastening	dia	Value (daNm)	Validity
Starter motor	Bolt	M8	2.25 ÷ 2.75

- Close the bonnet.- Remove the vehicle from the lift.