199001520 - 1016B12 SINGLE CAMSHAFT HOUSING - R.R. WITH TIMING BELT REMOVED - REPLACE GASKET
Removing
(
Refitting
)
Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. Op. 5520B10 STARTER MOTOR - R+R Op. 1072B50 AIR CHAMBER - R.R.1. Undo the bolts and remove the phase transformer solenoid protection.2. Disconnect the electrical connection for the phase transformer solenoid.
1. Unscrew the bolt securing the cable loom retaining duct.2. Disconnect the electrical connections for the ignition coils and move the wiring to one side.3. Undo the bolts and remove the ignition coils.4. Undo the fastenings (4a) and remove the oil vapour separator (4b).5. Disconnect the electrical connection for the timing sensor.6. Remove the intermediate coupling from the mounting bracket.
1. Undo the protective caps (1a) and undo the bolts (1b) securing the camshaft housing using the tool (1c).| Tool | Description | Function | Validity |
|---|
| 1860834000 | Spanner | Loosen/tighten the cylinder head extension bolts | 1.4 16v |
2. Gently lift the camshaft housing and insert the tool.| Tool | Description | Function | Validity |
|---|
| 1860988000 | Tappet retaining tool | Tappet retaining | 1.4 16v |
- Remove the single camshaft housing and gasket.
Refitting
(
Removing
)
- Fit a new camshaft housing gasket in position.- Place the single camshaft housing in position.- Remove the tappet retaining tool.| Tool | Description | Function | Validity |
|---|
| 1860988000 | Tappet retaining tool | Tappet retaining | 1.4 16v |
- Tighten the single camshaft housing fixing bolts to the recommended torque using the tool.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Engine cylinder head extension | Bolt | M8 | 1.3 ÷ 1.6 | 1.4 16v |
| Tool | Description | Function | Validity |
|---|
| 1860834000 | Spanner | Loosen/tighten the cylinder head extension bolts | 1.4 16v |
- Tighten the protective caps complete with new O-rings to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Engine cylinder head extension plugs | - | M16 | 1.3 ÷ 1.6 | 1.4 16v |
- Connect the intermediate coupling to the mounting bracket.- Connect the electrical connection for the timing sensor.- Place the oil vapour separator in its housing and tighten the fastenings.- Place the ignition coils in their housings and secure them tightening the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Ignition coils | Bolt | M6 | 0.8 ÷ 1.0 | 1.2 8v1.4 8v1.4 16v |
- Connect the electrical connections for the ignition coils and place the wiring in position.- Tighten the bolt securing the cable loom retaining duct.- Connect the electrical connection for the phase transformer solenoid.- Place the phase transformer solenoid guard back in its housing and secure it using the bolts. Op. 1072B50 AIR CHAMBER - R.R. Op. 5520B10 STARTER MOTOR - R+R Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R
