199001663 - 2110C30 GEARBOX REAR COVER - R + R.

Removing ( Refitting )     Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Fit the tool (1a) complete with support mountings (1b).
ToolDescriptionFunctionValidity
1870595000CrossmemberPower unit mount1.2 8v1.4 8v1.4 16v1.3 Multijet
ToolDescriptionFunctionValidity
1870650000Support blocksPower unit mount1.2 8v1.4 8v1.4 16v1.3 Multijet
2. Fit the tools (2a) and (2b), then connect them to the power unit mounting brackets using the links (2c).
ToolDescriptionFunctionValidity
1860851000CrossmemberPower unit mount1.2 8v1.4 8v1.4 16v1.3 Multijet
ToolDescriptionFunctionValidity
1871001300Vertical mountPower unit mount1.2 8v1.4 8v1.4 16v1.3 Multijet
1. Undo the bolts fixing the flexible mounting to the gearbox side rigid power unit support.2. Undo the upper bolt securing the gearbox side power unit rigid support.
- Adjust the support rods to tilt the power unit as necessary to access the gearbox rear cover fixing bolts.1. Undo the bolts (1a) and remove the gearbox rear cover (1b).
Refitting ( Removing ) - Thoroughly clean traces of sealant from the mating surfaces between the rear cover and the gearbox casing.- Apply sealant to the contact surfaces between the rear cover and the gear casing.- Place the gearbox rear cover back in its housing and secure it using the bolts.- Reposition the power unit adjusting the support rods.- Tighten the upper bolt securing the gearbox side rigid support to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Gearbox side power unit rigid support to gearbox casingBoltM81.8 ÷ 2.21.2 8v1.4 8v1.4 16v
- Tighten the bolts fixing the flexible mounting to the gearbox side rigid power unit support to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Gearbox side support flexible mounting to rigid supportBoltM129.5 ÷ 10.51.2 8v1.4 8v1.4 16v1.3 Multijet
- Remove the tools used for supporting the engine.    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.