199000086 - 5050C34 REAR WIPER ARM WITH BLADE - R+R
Removing
(
Refitting
)
1. Open the cover.2. Undo the nut.3. Remove the wiper arm.
Refitting
(
Removing
)
- Check that the windscreen wiper blade and the arm are not damaged.1. Place the arm in position checking that, in the rest position, the wiper (1a) is in line with the reference (1b) etched in the glass.2. Tighten the nut.
Component
Fastening
dia
Value (daNm)
Validity
Rearscreeen wiper arm
Nut
M6
0.6 ÷ 1.0
3. Close the cover.
- Check that the rear windscreen wiper is working properly.
Removing
(
Refitting
)
1. Open the cover.2. Undo the nut.3. Remove the wiper arm.
