199000436 - 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE
Removing
(
Refitting
)
Op. 0010T12 ENGINE OIL AND FILTER - REPLACE Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 1092G10 SINGLE ENGINE BELT - R.R Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R. Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R. Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED Op. 1020D18 FRONT CRANKSHAFT COVER OIL SEAL - R.R. 1. Undo the bolt and move the engine rpm sensor aside without disconnecting the connection.2. Disconnect the electrical connection for the minimum engine oil pressure switch.| Description | Connector | |
|---|---|---|
| 2 | Insufficient engine oil pressure sensor | See K030 ENGINE OIL PRESSURE SENSOR (SWITCH) |
Refitting
(
Removing
)
- Place the crankshaft front cover in its seat complete with gasket and tighten the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Crankshaft oil seal front cover | Bolt | M6 | 0.8 ÷ 1.0 | 1.2 8v1.4 8v1.4 16v1.3 Multijet |