199000892 - S017 FRONT SUSPENSION NOISE (WHISTLING/HUMMING)
Whilst driving, especially on unmade roads, there is a whistling noise coming from the front suspension. This diagnosis can only be made after diagnosis See table S015 NOISE WHILST DRIVINGCarry out the latter first.|  | If the problem is only on one side, carry out the checks and any operations on the appropriate side only. | 
| Test results | ||||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation | ||
|---|---|---|---|---|---|---|
| After carrying out a road test during diagnosis, a noise is heard from the front identifiable as a whistling/blowing. See table S015 NOISE WHILST DRIVINGContinue depending on the circumstances in which the noise occurs | End of diagnosis | 1. The noise increases when cornering2. The noise increases in vertical oscillation conditions | 1. Replace the wheel bearing on the side where the problem occurs, positioning it with the magnetic race towards the steering knuckle ring.    Op. 4450C32  ONE FRONT WHEEL HUB BEARING, LH OR RH - REPLACE 
 | |||
| 1 | BRAKE DISC CHECK | All OK | Problems encountered | Operation | ||
| Check for any distortion to the disc heat shield.Turn the wheel assembly to check for noise due to contact between disc and heat shield. | Move on to Step 2 | 1. Distortion of the heat shield2. Contact between heat shield and disc | 1. Restore the correct gap and replace the guard if necessary Op. 3310A59 FRONT BRAKE DISC GUARD (ONE), LEFT OR RIGHT- R.R 2. Replace the brake disc and replace the wheel bearing if the noise persists Op. 3310A48 FRONT BRAKE DISC (ONE), LEFT OR RIGHT - R.R Op. 4450C32 ONE FRONT WHEEL HUB BEARING, LH OR RH - REPLACE | |||
| 2 | SHOCK ABSORBER STEM CHECK | All OK | Problems encountered | Operation | ||
| Remove the left and/or right wheel. Op. 4450B02 LEFT FRONT WHEEL - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Check that the noise is not due to irregular friction between the shock absorber stem and the gasket, checking the condition (scoring/contact marks) of the stem chrome surface. | End of diagnosis | There is irregular friction | Lubricate the stem raising the dust cover with a layer of silicon grease.If the noise persists, replace the shock absorber Op. 4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R | |||
