199002370 - 1080B94 FRONT LAMBDA SENSOR TO WITH CATALYTIC CONVERTER - R.R

Removing ( Refitting ) - Undo the bolts and move the engine coolant reservoir to one side.1. Disconnect the electrical connection (1a), then unscrew and undo the Lambda sensor in front of catalytic converter (1b).

	Description	Connector
1a	Lambda sensor on pre-catalyzer	See K015 LAMBDA SENSOR ON PRE-CATALYZER

Refitting ( Removing ) - Position the front Lambda sensor in its housing and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Lambda sensor	-	M18	4.1 ÷ 5.0	1.2 8v1.4 8v1.4 16v1.3 Multijet

- Connect the electrical connection for the front Lambda sensor to the catalytic converter.- Fit the engine cooling reservoir in place and secure it using the bolts.