5580C22 AIR BAG MODULE - PASSENGER SIDE - R.R - Fiat - GRANDE PUNTO - eLearn

199000162 - 5580C22 AIR BAG MODULE - PASSENGER SIDE - R.R

)

Before removing and refitting the Air Bag module the following preliminary operations must be carried out.- Turn the ignition key to the OFF position and extract it.- Disconnect the battery leads and insulate them.- Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS Op. 5580C AIR BAG SYSTEM

Op. 7040A46 DOCUMENT HOLDER IN GLOVE COMPARTMENT IN DASHBOARD - R.R.1. Disconnect the electrical connections (1a) and (1b).

Description	Component
AIRBAG ON DASHBOARD (PASSENGER SIDE)	See Q011 AIR BAG IN DASHBOARD (PASSENGER SIDE)

2. Undo the bolt.3. Remove passenger airbag module (3a) by undoing retainer (3b).

- Place the Air Bag module in the special cupboard resting it on a free surface with the bag facing upwards.

Refitting ( Removing

) - Observe the following precaution.

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes together with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2005 for 2019).

1. Position passenger airbag module (1a) by doing up retainers (1b).2. Tighten the bolt.

Component	Fastening	dia	Value (daNm)	Validity
Passenger Air Bag module	Bolt	M6	0.6 ÷ 1.0

3. Connect the electrical connections.

Op. 7040A46 DOCUMENT HOLDER IN GLOVE COMPARTMENT IN DASHBOARD - R.R.- Connect the battery.- Use an Examiner to check that the system has not acquired errors during the operation.