5505B10 FRONT DOOR WIRING (ONE), LEFT OR RIGHT - R.R. WITH WATER GUARD OR FRAME DETACHED - Fiat - GRANDE PUNTO - eLearn

199000092 - 5505B10 FRONT DOOR WIRING (ONE), LEFT OR RIGHT - R.R. WITH WATER GUARD OR FRAME DETACHED

) 1. Remove the moulding (1a) using the special tool, releasing the retainers (1b) and (1c).

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

2. Disconnect the electrical connection.

Description	Component
LEFT EXTERIOR REAR VIEW MIRROR	See P060 DRIVER'S DOOR MIRROR
RIGHT EXTERIOR REAR VIEW MIRROR	See P061 RIGHT DOOR MIRROR

3. Fit a sensor to the end (3a) of the wiring (3b), then extract the actual wiring pulling it towards the inside of the door, leaving the sensor in its place (to be used for reinserting the wiring when refitting).

1. Disconnect the electrical connections (1a, 1b, 1c).

Description	Component
DRIVER''S FRONT DOOR JOIN	See D030 DRIVER'S FRONT DOOR COUPLING
PASSENGER FRONT DOOR JOIN	See D031 PASSENGER FRONT DOOR COUPLING
LEFT FRONT ELECTRIC WINDOW MOTOR	See N060 DRIVER'S FRONT ELECTRIC WINDOW MOTOR
RIGHT FRONT ELECTRIC WINDOW MOTOR	See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR
LEFT FRONT DOOR LOCK GEARED MOTOR	See N050 DRIVER'S FRONT DOOR LOCK GEARED MOTOR
RIGHT FRONT DOOR LOCK GEARED MOTOR	See N051 RIGHT FRONT DOOR LOCK GEARED MOTOR

2. Release the partition seal from the frame.3. Release the wiring retainers from the chassis.4. Recover the wiring by withdrawing from the upper part.

Refitting ( Removing

) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Position the wiring and attach the retainers.- Fit the partition seal on the frame.- Connect the electrical connections.- Place the moulding in position and attach the retainers.- Fit the partition seal on the frame.- Connect the electrical connections.- Place the moulding in position and attach the retainers.