199000102 - 5520B10 STARTER MOTOR - R+R

Removing ( Refitting ) - Position the vehicle on a lift.- Open the bonnet.    Op. 5530B10 BATTERY - R+R 1. Working from the left side of the engine, unscrew the upper starter motor bolt.
- Raise the vehicle.1. Open the protective cover for the starter motor electrical connections.2. Undo the nut.3. Disconnect electrical connections (3a, 3b) from the starter motor.
DescriptionConnector
3STARTER MOTOR    See A020 STARTER MOTOR
4. Unscrew the lower starter motor bolt.5. Remove the starter motor.
Refitting ( Removing ) - Check that the starter motor is not damaged.1. Place the starter motor in position.2. Screw in the lower starter motor bolt and tighten to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Starter motorBoltM82.25 ÷ 2.75
3. Connect the electrical connections for the starter motor, tighten the nut and close the protective cover.
ComponentFasteningdia  Value (daNm)Validity
Positive lead (+30) on starter motorNutM80.7 ÷ 1.1
- Lower the vehicle.- Screw in the upper starter motor bolt.
ComponentFasteningdia  Value (daNm)Validity
Starter motorBoltM82.25 ÷ 2.75
    Op. 5530B10 BATTERY - R+R - Close the bonnet.- Remove the vehicle from the lift.