199000439 - 1020D30 FLYWHEEL SIDE OIL SEAL COVER - R.R. AND REPLACE GASKETS WITH FLYWHEEL REMOVED

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION 1. Undo the bolts (1a), then remove the flywheel side oil seal cover (1b). Refitting ( Removing ) - Place the flywheel side cover in its housing and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Crankshaft to crankcase rear cover	Bolt	M6	0.8 ÷ 1.0	1.2 8v1.4 8v1.4 16v

    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.