199000605 - 1092A10 CRANKSHAFT PULLEY - R + R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. 1. Fit a suitable (6 mm diameter) peg on the flywheel via the special opening in the gearbox to be used for counter-torque.

Check that the pin is correctly inserted in the housing in the flywheel.

1. Undo bolts (1a) and remove the service pulley on crankshaft (1b). Refitting ( Removing ) - Position the service pulley on the crankshaft in its housing and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Services pulley on crankshaft	Bolt	M8	2.3 ÷ 2.8

- Remove the peg used for counter-torque from the opening in the gearbox.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.