199000958 - 2125C31 GEAR SELECTION/ENGAGEMENT CABLES REACTION BRACKET - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Disconnect the gear selector and engagement cables.2. Retract the safety ring and disconnect the gear selector and engagement cables from the bracket.3. Undo the bolts and remove the reaction bracket from the gearbox. Refitting ( Removing ) - Place the reaction bracket in position and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Gear engagement/selection cables reaction bracket	Bolt	M8	2.2 ÷ 2.7

- Introduce the two quick-fits for the hoses in the openings in the bracket keeping the cursors retracted and inserting them fully into the seats using manual pressure until they are attached. Release the cursors.- Connect the ends of the gear selection and engagement cables to the ends of the levers on the gearbox.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R