2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R - Fiat - GRANDE PUNTO - eLearn

199002391 - 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R

) Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 4450B04 RIGHT FRONT WHEEL - R.R - Unscrew the brake caliper retaining bolts and move aside, refer to Op. 3310A60 FRONT BRAKE PADS - REPLACE 1. Remove the staking (1a), fit the tool (1b) and undo the wheel hub fixing nut.

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front drive shaft to wheel hub

1. Undo the bolt (1a) securing the ABS rpm sensor (1b) and move it aside.2. Unscrew the nut (2a), fit the tool (2b) and disconnect the steering link (2c) from the wheel strut.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

3. Undo the bolts securing the shock absorber to the wheel strut.4. Undo the bolt securing the steering strut to the lower track control arm.

- Disconnect the strut from the driveshaft.1. Undo the bolts (1a) and remove the right driveshaft (1b) complete with intermediate driveshaft (1c).

Refitting ( Removing

) - Refit the right driveshaft complete with joints and intermediate driveshaft.- Tighten the bolt fixing the steering knuckle to the lower track control arm to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension lower wishbone - strut side	Bolt	M10	5.4 ÷ 6.6

- Connect the shock absorber to the knuckle and tighten the new bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front shock absorber - strut side	Bolt (to be replaced)	M12	10.3 ÷ 12.6 + 45°

- Connect the steering link to the steering strut and secure by tightening the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Position the ABS rpm sensor in its housing and secure it using the bolt.- Tighten the new wheel hub securing nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut (to be replaced)	M24 x 1.5	6.6 ÷ 7.3 + 62° +/- 2°	1.4 16v TJet1.3 Multijet1.9 Multijet

1. Stake the nut.

- Fit the brake caliper from its seat and tighten the bolts, refer to Op. 3310A60 FRONT BRAKE PADS - REPLACE Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 0010T40 CHANGE MANUAL GEARBOX OIL