Removing
(
Refitting
)
1. Lift up the wiper arm (1a) and rotate the blade (1b) until it is in the positions shown in the diagram.2. Push the blade (2a) in the direction shown in the diagram to release the pin (2b) from the housing (2c) for the wiper arm.3. Keep the blade extracting it from the arm.
Refitting
(
Removing
)
- Check that the blade is not damaged and that the rubber is intact.- Reposition the blade attaching the pin in the housing in the wiper arm.- Lower the wiper arm.- Check that the rear windscreen wiper is working properly.
Removing
(
Refitting
)
1. Lift up the wiper arm (1a) and rotate the blade (1b) until it is in the positions shown in the diagram.2. Push the blade (2a) in the direction shown in the diagram to release the pin (2b) from the housing (2c) for the wiper arm.3. Keep the blade extracting it from the arm.