199000679 - 7025A10 BONNET LID - ALIGNMENT

- Raise the bonnet lid.1. If necessary, adjust the buffers. 1. If necessary, loosen the bolts with nut (1a) and adjust the position of lock (1b).

NOTE: The arrows indicate the possible movements.

2. Tighten the bolts with nut.

Component	Fastening	dia	Value (daNm)	Validity
Bonnet striker	Bolt	M6	0.6 ÷ 1.0

1. If necessary, loosen the bolts (1a) for the hinges on both sides of the vehicle and adjust the position of the bonnet lid (1b).

NOTE: The arrows indicate the possible movements.

2. Tighten the bolts for the hinges.

Component	Fastening	dia	Value (daNm)	Validity
Hinges to bonnet	Bolt	M6	0.6 ÷ 1.0

- If the adjustments indicated in the previous points are insufficient, adjust the position of the bonnet hinges as described below.1. Loosen the bolts (1a) fixing the hinges (1b) and adjust the position until the bonnet is aligned.

NOTE: The arrows indicate the possible movements.

2. Tighten the bolts for the hinges.

Component	Fastening	dia	Value (daNm)	Validity
Bonnet hinges to body	Bolt	M8	2.25 ÷ 2.75

- Repaint the hinge area.