199000748 - B002 STARTER MOTOR NOT WORKING

When the key is turned to the MAR position, the instruments light up but the starter motor does not turn.

		Test results
1	STARTER MOTOR CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check the connections between battery, ignition switch and starter motor    See E5010 STARTING AND RECHARING Check if the maxi fuse in the battery control unit has blown	Move on to Step 2	Connections not correct	Restore the battery connections    See E5010 STARTING AND RECHARING
			Earth lead damaged	Replace the lead
			Lead between battery and starter motor damaged	Replace the lead
			Maxi fuse blown	Replace the maxi fuse after having ascertained the cause of the problem
2	IGNITION SWITCH CHECK	All OK	Problems encountered	Operation
	Check the condition of the ignition switch and that it is working properly	Move on to Step 3	Ignition switch fault	Repair or replace the ignition switch    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R
3	STARTER MOTOR CHECK	All OK	Problems encountered	Operation
	Check the condition of the starter motor and that it is working properly	End of diagnosis	Fault in the starter motor	Overhaul the starter motor
			Fault in the starter motor that cannot be repaired	Replace the starter motor    Op. 5520B10 STARTER MOTOR - R+R