199000855 - K102 DISPLAY MODULE NO SIGNAL - TO CHECK PANEL

The display module is turned on by the panel at the key on and displays information for the user

		Results of the tests
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check the operation of the display segments at the INSTRUMENT PANEL NODE by activating the Autotest function in active diagnosis	Move on to Step 2	One or more segments does not come on	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
2	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Contact technical service for further information on the problem