199000935 - 1820B38 HYDRAULIC CLUTCH ACTUATOR WITH COAXIAL CONTROL - R.R WITH GEARBOX REMOVED
Removing
(
Refitting
)
1. Release the protection from the bell housing and remove it.2. Open the tabs (2a), undo the bolts (2b) and remove the coaxial control hydraulic clutch actuator (2c).
1. Cut the sealant and remove the flange and main shaft oil seal.
Refitting
(
Removing
)
- Apply sealant to the new flange and oil seal and place it in position.- Place the clutch hydraulic actuator in its housing and secure it using the bolts.- Fold over the flange retaining tabs.- Place the protection back in its housing.
Removing
(
Refitting
)
1. Release the protection from the bell housing and remove it.2. Open the tabs (2a), undo the bolts (2b) and remove the coaxial control hydraulic clutch actuator (2c).
