199002444 - 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR
Removing
(
Refitting
)
- Open the bonnet.1. Undo the bolts (1a) and the nuts (1b).2. Disconnect the rod (2a) from the two retainers (2b).3. Keep the lock.
Refitting
(
Removing
)
- Check that the lock is not damaged.- Connect the rod to the two retainers.- Position the lock and screw in the bolts with the nuts without tightening them.1. Adjust the position of the lock. | NOTE: The arrows indicate the possible movements. |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Bonnet striker | Bolt | M6 | 0.6 ÷ 1.0 |
