| | Test results |
| 1 | BOWDEN CABLE MOUNTING CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the bowden cable for the guide memory is correctly mounted (cable+idler+spring) | Move on to Step 2 | Control cable from regulator/idler spring/outer casing retaining bracket detached, broken | Reattach the cable or replace the control unit Op. 7045A88 FRONT SEAT BACKREST FOLDING DEVICE WITH FLEXIBLE CABLES, LEFT OR RIGHT - R.R. |
| 2 | MEMORY UNIT CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the memory unit checking, in particular, for the presence of foreign elements between the memory guide mechanisms or distortion/breaking of the memory plate tooth | Move on to Step 3 | 1. Foreign elements present between the memory guide mechanisms2. Memory plate tooth and/or kinematic components distorted/broken | 1. Release the mechanisms from the elements in between and lubricate the connecting rods/hinges/control shaft2. Replace the memory guide Op. 7045A64 FRONT SLIDING SEAT POSITION MECHANICAL MEMORY CONTROL CABLE . (ONE), LEFT OR RIGHT - R.R. |
| 3 | CORRECT SEAT FASTENING CHECK | All OK | Problems encountered | Operation |
|---|
| Check the following, in order:- the application of the correct seat tightening cycle to the vehicle floor;- the correct flatness of the seat fastening bodyshell bracket;- the correct attachment of the mounting to the element control aerial;- the presence of distortions to the element;- the travel of the stem release control | End of diagnosis | 1. Incorrect fitting of seat to the floor2. Flatness not correct3. Incorrect attachment of the mounting to the element control aerial4. Presence of distortions to the element4. Incomplete travel of the stem release control | 1. Fit the seat correctly on the floor2. Place a correct size shim between the guide and the bracket3. Replace the guide release mounting3. Reattach the mounting correctly in position4. Replace the guide |
