199002748 - 4120A10 STEERING BOX - R+R - CHECK WHEEL TOE-IN IF NECESSARY SEPARATELY

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R. 1. Undo the bolt (1a) fixing the steering column to the steering box pinion (1b). 1. Unscrew the nut (1a) and use the tool (1b) to disconnect the steering link (1c) from the steering knuckle.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

- Repeat the same operation on the right side. 1. Undo the bolts fixing the steering box to the suspension crossmember. - Position a hydraulic lift under the gearbox, move the power unit away from the suspension crossmember and then remove the steering box. Refitting ( Removing ) - Place the steering box in position and secure it using the bolts.

Component	Fastening	dia	Value (daNm)	Validity
Steering box to suspension crossmember	Bolt	M12	9.0 ÷ 11.0

- Connect the steering link to the steering strut and secure by tightening the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Connect the steering column to the steering box pinion tightening the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering column to steering box pinion	Bolt	M10	5.0 ÷ 6.0

    Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.