199000107 - 5530A10 ALTERNATOR - R+R

Removing ( Refitting )     Op. 1092B60 ALTERNATOR DRIVE BELT - R + R 1. Release and open the cover for the alternator electrical connections.2. Disconnect the electrical connections (2a) and (2b) for the alternator.

Description	Component
ALTERNATOR	See A010 ALTERNATOR

3. Undo the nut with the alternator bolt.4. Undo the alternator fixing bolts.5. Remove the alternator. Refitting ( Removing ) - Check that the alternator is not damaged.- Position the alternator.- Do up the alternator retaining bolts without tightening.- Screw in the nut with the alternator bolt without tightening it.- Connect the electrical connections for the alternator and tighten the nuts.

Component	Fastening	dia	Value (daNm)	Validity
Alternator recharging lead	Nut	M8	0.7 ÷ 1.1

Component	Fastening	dia	Value (daNm)	Validity
Warning light supply lead at alternator	Nut	M5	0.3 ÷ 0.5

- Close the cover for the electrical connections.- Refit the alternator belt and adjust the correct tension.    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R