199000122 - 5540B28 BULB (ONE) FOR FRONT DIRECTION INDICATOR IN HEADLAMP/LIGHT CLUSTER, LH OR RH - R.R
Removing
(
Refitting
)
- Proceed as follows for the left headlamp turn signal.- Open the bonnet.1. Release anchorage (1a) from fitting (1b) of the reservoir containing the washer fluid from clip (1c).2. Withdraw fitting (2a) of the reservoir from its seat (2b).
1. Rotate the bulb holder with the bulb and extract it.2. Remove the bulb from the bulb holder (bayonet fitting).
- Proceed as follows for the right headlamp turn signal.- Open the bonnet.1. Rotate the bulb holder with the bulb and extract it.2. Remove the bulb from the bulb holder (bayonet fitting).
Refitting
(
Removing
)
- Check the condition of the bulb and make sure that it is clean.- Fit the bulb in the bulb holder.- Fit the bulb holder and bulb in the housing.- If removed previously, position the washer fluid reservoir fitting and do up the anchorage.- Check that the bulb is working.- Close the bonnet.
Removing
(
Refitting
)
- Proceed as follows for the left headlamp turn signal.- Open the bonnet.1. Release anchorage (1a) from fitting (1b) of the reservoir containing the washer fluid from clip (1c).2. Withdraw fitting (2a) of the reservoir from its seat (2b).
