Removing
(
Refitting
)
- Position the vehicle on a lift and raise.1. Disconnect the electrical connection.
Description
Component
REAR REVERSING LIGHT
See
2. Undo the foglamp retaining bolt
1. Release the tail-light tab (1a) from its seat (1b) on the bumpers and recover the tail-light (1c).
1. Rotate the bulb holder and extract it.2. Remove the bulb from the bulb holder (bayonet fitting).
Refitting
(
Removing
)
- Check that the light is not damaged.- If removed, fit the bulb in the bulb holder and fit the bulb holder in its seat with the bulb.- Connect the electrical connection.- Position the tail-light and insert the tab in the seat on the bumper.- Secure the tail-light with the bolt.- Check that the tail-light is working.- Lower the vehicle and remove it from the lift.
Removing
(
Refitting
)
- Position the vehicle on a lift and raise.1. Disconnect the electrical connection.
