199000348 - 7050A39 JOINT/HINGES FOR BACKREST, LEFT OR RIGHT, FOR SPLIT REAR SEAT - R.R .
Removing
(
Refitting
)
Op. 7050A22 REAR SEAT CUSHION - R+R Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R. Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R. 1. Remove the end part (1a) of zip fastener (1b).2. Use pliers to remove the end clamp.3. Open the zip fastener (3a) as far as necessary, only using slide (3b) (in the repair kit) inserted in the position shown in the figure. | If zip (3a) is not opened using slide (3b), it may not be possible to reclose it correctly during refitting. |
Refitting
(
Removing
)
- Check that the hinge is not damaged.- Position the hinge.- Tighten the bolts.1. Close zip fastening (1a) using slide (1b) already applied when opening the zip fastener. Remove the slide and apply a retaining clamp (1c) to the end of the zip fastener.2. Fit the end part of the zip fastener to the inside of the trim.