199000351 - 7050A45 STRIKER FOR ONE SPLIT REAR SEAT BACKREST FASTENING RELEASE DEVICE, LEFT OR RIGHT - R.R
Removing
(
Refitting
)
- Lower the backrest.1. Remove the trim (1a) releasign the flexible retainers (1b), then the rigid retainer (1c).2. Undo the nuts.3. Remove the striker.
Refitting
(
Removing
)
- Check that the striker is not damaged.- Position the striker.1. Screw in the nuts, without tightening them.2. Adjust the position of the striker (2a) with the backrest attachment device; the arrows (2b) show the possible movements.3. Tighten the nuts
Component
Fastening
dia
Value (daNm)
Validity
Rear seat striker
Nut
M8
2.25 ÷ 2.75
- Position the trim and attach the retainers.- Lift up the backrest and check that it is correctly attached to the striker.
Removing
(
Refitting
)
- Lower the backrest.1. Remove the trim (1a) releasign the flexible retainers (1b), then the rigid retainer (1c).2. Undo the nuts.3. Remove the striker.