199000445 - 1024B10 ENGINE FLYWHEEL - R + R FOR VERSIONS WITH MANUAL GEARBOX
Removing
(
Refitting
)
Op. 4450B12 FRONT WHEELS (TWO) - R+R Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 7055B65 Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R. Op. 1008C34 BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R. Op. 4410D15 FRONT SUSPENSION CROSSMEMBER COMPLETE WITH TRACK CONTROL ARMS AND ANTI-ROLL BAR - R.R Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 3310A60 FRONT BRAKE PADS - REPLACE Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 1008A45 GEARBOX SIDE RIGID SUPPORT REINFORCEMENT Op. 1048B25 INTERMEDIATE RIGID PIPE BETWEEN HEAT EXCHANGER AND THROTTLE BODY - R R Op. 5520B10 STARTER MOTOR - R+R Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R Op. 1810A20 CLUTCH - R + R
1. With the flywheel lock (1a) fitted, undo the bolts (1b) and remove the flywheel (1c).| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860846000 | Counter-torque | Flywheel lock |
 | The bolts fixing the flywheel are pre-treated with sealant, therefore they should be replaced each time they are removed. |
Refitting
(
Removing
)
- Place the flywheel in its housing and tighten the new bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine flywheel | Bolt (to be replaced) | M9 | 1.9 ÷ 2.1 + 50° +/- 2° | 1.4 16v TJet |