199000458 - 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Removing ( Refitting ) 1. Fit the tool.
This operation is necessary, in spite of the flywheel lock having been fitted, to lock the pulley preventing it from bending during the loosening/tightening of the fixing bolt with consequent damage to the internal locating pin.
ToolDescriptionFunctionValidity
2000004500TemplateCrankshaft timing1.2 8v1.4 8v1.4 16v
2. Undo the toothed drive pulley fixing bolt.- Remove the template.3. Remove the toothed drive pulley
Refitting ( Removing ) - Place the toothed drive pulley in its housing.- Fit the tool.
ToolDescriptionFunctionValidity
2000004500TemplateCrankshaft timing1.2 8v1.4 8v1.4 16v
- Tighten the bolt fixing the toothed drive pulley to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Crankshaft gearBoltM121.9 ÷ 2.1 + 107° ÷ 113°1.4 16v
- Remove the template.