- Fold the rear seat cushion over.1. Using the tool (1a) release and remove the access cover to the fuel pump assembly (1b).
Tool
Description
Function
Validity
1823015000
Knife
Retainer removal
1. Disconnect the rear fuel supply pipe rapid connector.
- Position a hydraulic jack with a suitable support under the fuel tank.1. Open the clips (1a) securing the rear brake fluid pipes (1b) to the reservoir.2. Unscrew the front bolts (2a) securing the tank support bracket (2b) to the body.
1. Unscrew the rear bolts (1a) securing the tank support brackets (1b) to the body.
- Lower the tank and disconnect the fuel supply pipe from the fastening clips on the body and remove it.Refitting
(
Removing
)
- Refit the rear fuel delivery pipe to its seat and secure it to the clips.- Raise the fuel tank using the hydraulic jack and secure it to the bodyshell tightening the bolts to the recommended torque.
Removing
(
Refitting
)
- Position the vehicle on a lift.- Open the fuse box cover in the engine compartment, remove fuse F30 (15A) and start the engine several times until the fuel pressure in the distribution manifold is expended.- Fit the fuse removed previously and close the fuse box cover.
Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R Op. 1040E22 FUEL PIPE PROTECTION - R.R For Sport versions, instead of carrying out operation 1040E22 proceed with the operation Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.for removing the right side protection.1. Disconnect the front rapid connector for the rear fuel supply pipe.
