199000596 - 1088D24 WATER PUMP RIGID COOLANT INLET PIPE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.    Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R    Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 1080B62 CATALYTIC CONVERTER - R + R     Op. 1048B14 AIR DELIVERY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE     Op. 1084C22 HEAT SHIELD ON ENGINE OIL HEAT EXCHANGER - R.R.     Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1088D55 COOLANT SUPPLY PIPE TO ENGINE OIL HEAT EXCHANGER - R.R.    Op. 1088D51 COOLANT SUPPLY PIPE FROM CRANKCASE TO OIL/WATER HEAT EXCHANGER - R.R. WITH REAR ENGINE SUPPORT REMOVED    Op. 1088D50 ENGINE COOLANT OUTLET PIPE FROM TURBOCHARGER - R.R.    Op. 5530B10 BATTERY - R+R     Op. 1048B25 INTERMEDIATE RIGID PIPE BETWEEN HEAT EXCHANGER AND THROTTLE BODY - R R    Op. 1048B30 AIR SUPPLY HOSE FROM RIGID PIPE TO THROTTLE BODY - REPLACE 1. Loosen the band and disconnect the heater return pipe, water pump rigid return pipe side.2. Undo the bolt fixing the water pump rigid inlet pipe to the cylinder head. 1. Loosen the band and disconnect the outlet hose from the radiator, water pump rigid inlet pipe side. 1. Undo the bolt fixing the water pump rigid inlet pipe to the cylinder block/crankcase.2. Remove the water pump rigid inlet pipe. 1. Remove the O-rings (1a) and (1b) from the water pump rigid inlet pipe (1c). Refitting ( Removing ) - Fit new O-rings on the water pump rigid inlet pipe.- Place the water pump rigid inlet pipe in position and tighten the bolt securing it to the cylinder block/crankcase.- Connect the radiator water outlet hose, water pump rigid inlet pipe side and tighten the band.- Tighten the bolt fixing the water pump rigid inlet pipe to the cylinder head.- Connect the return pipe to the heater, water pump rigid inlet pipe side and tighten the band.     Op. 1048B30 AIR SUPPLY HOSE FROM RIGID PIPE TO THROTTLE BODY - REPLACE    Op. 1048B25 INTERMEDIATE RIGID PIPE BETWEEN HEAT EXCHANGER AND THROTTLE BODY - R R    Op. 5530B10 BATTERY - R+R     Op. 1088D50 ENGINE COOLANT OUTLET PIPE FROM TURBOCHARGER - R.R.    Op. 1088D51 COOLANT SUPPLY PIPE FROM CRANKCASE TO OIL/WATER HEAT EXCHANGER - R.R. WITH REAR ENGINE SUPPORT REMOVED    Op. 1088D55 COOLANT SUPPLY PIPE TO ENGINE OIL HEAT EXCHANGER - R.R.    Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R     Op. 1084C22 HEAT SHIELD ON ENGINE OIL HEAT EXCHANGER - R.R.     Op. 1048B14 AIR DELIVERY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE     Op. 1080B62 CATALYTIC CONVERTER - R + R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R    Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.