199000712 - 3330C44 BRAKE FLUID MINIMUM W/L SWITCH - R + R

Removing ( Refitting ) Proceed as described below for left hand drive versions- Disconnect the negative battery terminal.    Op. 5530B10 BATTERY - R+R     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the electrical connection for the brake fluid minimum warning light switch.

	Description	Connector
1	Brake fluid level sensor (switch)	See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)

2. Compress the spring and simultaneously remove the minimum brake fluid warning light switch from the reservoir. Proceed as described below for right hand drive versions1. Disconnect the electrical connection for the brake fluid minimum warning light switch.2. Compress the clip (2a) and remove the reservoir (2b) from the mounting bracket complete with pipes. 1. Compress the clip (1a) and remove minimum brake fluid warning light switch (1b). Refitting ( Removing ) Proceed as described below for left hand drive versions- Place the brake fluid minimum level warning light switch in its housing and connect the electrical connection.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B10 BATTERY - R+R - Connect the negative battery terminal. Proceed as described below for right hand drive versions- Place the brake fluid minimum level warning light switch in its housing and secure it with the retaining clip.- Place the reservoir on the bracket until the fastening clip is fully fitted.- Secure the electrical connection for the brake fluid minimum level warning light switch and close the wiring retaining clip.