199000716 - 3330D26 VACUUM PIPE FOR BRAKE SERVO ASSEMBLY - R.R
Removing ( Refitting ) 1. Loosen the band and disconnect the brake servo vacuum pump pipe from the intake chamber.- Open the brake servo vacuum pipe intermediate retaining clips.2. Disconnect and remove the single-acting valve from the brake servo complete with pipe.
Refitting
(
Removing
)
- Refit the single-acting valve complete with pipe in its housing and connect it to the brake servo.- Connect the vacuum pump pipe for the brake servo to the intake chamber and tighten the band.- Close the brake servo vacuum pipe intermediate retaining clips.