199000732 - 3340B62 RIGID PIPE (ONE), LEFT OR RIGHT, FROM HYDRAULIC CONTROL UNIT WITH PIPE CONNECTOR TO REAR BRAKES - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.For the Sport version- Remove the underbody protection on the left hand side, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 3330C10 MASTER CYLINDER (PUMP) - R + R     Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Undo the connector for the rigid pipe from the ABS control unit.- Undo the rigid pipe fastening clips.
1. Open clips (1a), undo connector (1b) and remove rigid pipe (1c).
Refitting ( Removing ) - Place the rigid pipe in position, close the clips and tighten the connector to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM101.4 ÷ 1.8
- Tighten the connector, fastening the rigid pipe to the ABS control unit to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Rigid pipes from hydraulic control unit to right front/rear brakes - control unit sideConnectorM121.4 ÷ 1.8
    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 3330C10 MASTER CYLINDER (PUMP) - R + R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR For the Sport version- Place the underbody protection on the left hand side in position, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.