199000733 - 3340B67 RIGID PIPE FROM CONNECTOR TO RIGHT REAR BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.For the Sport version - Remove the underbody protection on the left hand side, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.- Unscrew the brake fluid reservoir plug and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

1. Undo the connector (1a) and open the clips (1b). 1. Undo the bolt securing the handbrake cable mounting bracket to the bodyshell.2. Undo the connector (2a) and remove the rigid pipe (2b) from the fastening clips (2c). Refitting ( Removing ) - Place the rigid pipe in position, secure it using the clips and tighten the connectors to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Tighten the bolt securing the handbrake mounting bracket to the bodyshell.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR For the Sport version - Place the underbody protection on the left hand side in position, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.- Remove the vehicle from the lift.