2125C30 GEAR ENGAGEMENT/SELECTION CABLES - R.R - Fiat - GRANDE PUNTO - eLearn

199000957 - 2125C30 GEAR ENGAGEMENT/SELECTION CABLES - R.R

) - Position the vehicle on a lift. Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 1076A42 FRONT EXHAUST SILENCER FRONT HEAT SHILED R R 1. Disconnect the exhaust pipe flexible mounting.2. Unscrew the nuts (2a), disconnect the exhaust pipe (2b) and put it to one side.

- Position the gear lever in neutral.- Open the upper gear lever boot closure.1. Disconnect the gear selector and engagement cables.2. Retract the cursor and disconnect the gear selector and engagement cables from the bracket.

1. Adjust the clips (1a) and remove the cover (1b) from the gearbox hand lever support.

1. Disconnect the cables (1a), compress the clips (1b) and remove the gear selection-engagement cables (1c) from the gearbox hand control lever mounting (1d).

Refitting ( Removing

) - Position the gear selection and engagement cables in their seat and connect the rear terminals to the gear lever ball heads.- Fit the cover and secure it using the clips.- Release the rear exhaust pipe from the provisional fastening, connect it to the front section with a new seal and tighten the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Intermediate exhaust pipe with flexible section	Nut	M8	2.3 ÷ 2.8	1.4 16v TJet

- Connect the rear exhaust pipe flexible mounting.- Lower the vehicle and position the gear lever in neutral.- Introduce the two quick-fits for the hoses in the openings in the bracket keeping the cursors retracted and inserting them fully into the seats using manual pressure until they are attached. Release the cursors.- Connect the ends of the gear selection and engagement cables to the ends of the levers on the gearbox. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R Op. 1076A42 FRONT EXHAUST SILENCER FRONT HEAT SHILED R R - Remove the vehicle from the lift.