199000966 - 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOE-IN/TOE-OUT SEPARATELY

Removing ( Refitting )     Op. 4450B12 FRONT WHEELS (TWO) - R+R - Measure the length of the steering rods to be used in the refitting.1. Undo the nut fixing the steering rod to the left steering knuckle.2. Fit the tool and disconnect the steering rod from the left steering knuckle.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

3. Loosen the locknut, then undo the steering box rod and remove it.- Carry out the same operations for the right steering rod. Refitting ( Removing ) - Tighten the steering rod until the same length as at the removal is produced.- Tighten the locknut the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Adjustment rod	Nut	M14	4.5 ÷ 5.5

- Connect the steering link to the left steering knuckle and tighten the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Carry out the same operations for the right steering rod.    Op. 4450B12 FRONT WHEELS (TWO) - R+R