199000977 - 4410C10 FRONT SUSPENSION ANTI-ROLL BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting )     Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.     Op. 4120A10 STEERING BOX - R+R - CHECK WHEEL TOE-IN IF NECESSARY SEPARATELY 1. Undo the nuts (1a) securing the anti-roll bar to the joints (1b). 1. Undo the bolts (1a) securing the anti-roll bar (1b) to the suspension crossmember and remove it.- Position a hydraulic lift under the gearbox, move the power unit away from the suspension crossmember and then remove the anti-roll bar. Refitting ( Removing ) - Place the anti-roll bar in its housing and secure it to the suspension crossmember and to the two joints.- Tighten the bolts and the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Anti-roll bar to front suspension crossmember	Bolt	M8	2.3 ÷ 2.7

Component	Fastening	dia	Value (daNm)	Validity
Anti-roll bar joint	Nut	M10	4.5 ÷ 5.5

    Op. 4120A10 STEERING BOX - R+R - CHECK WHEEL TOE-IN IF NECESSARY SEPARATELY     Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 4450B12 FRONT WHEELS (TWO) - R+R