199001018 - 4450D10 HUB FOR ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting )     Op. 7040L22 REAR COVER ON TUNNEL - R.R.    Op. 4450B13 REAR WHEELS (TWO) - R.R     Op. 3310B62 REAR BRAKE PADS - REPLACE     Op. 3310B57 REAR BRAKE CALIPER BRACKET (ONE), LEFT OR RIGHT - R.R.     Op. 3310B48 REAR BRAKE DISC (ONE), LEFT OR RIGHT - R.R.1. Release the protective boss (1b) using the tool (1a).

Tool	Description	Function	Validity
1847056000	Extractor	Removing rear wheel hub cap nut

1. Undo the nut (1a) and remove hub cap assembly (1b).

The bearing is built into the hub cap and cannot therefore be separated individually.

Refitting ( Removing ) - Refit the hub cap assembly in its seat and tighten the new nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear wheel hub	Nut (to be replaced)	M22 x 1.5	28

- Place the protective boss in its housing.    Op. 3310B48 REAR BRAKE DISC (ONE), LEFT OR RIGHT - R.R.    Op. 3310B57 REAR BRAKE CALIPER BRACKET (ONE), LEFT OR RIGHT - R.R.     Op. 3310B62 REAR BRAKE PADS - REPLACE     Op. 4450B13 REAR WHEELS (TWO) - R.R     Op. 7040L22 REAR COVER ON TUNNEL - R.R.