199001527 - 4450B93 REAR TYRES PRESSURE TRANSMITTER, (ONE) LH OR RH - R R

Removing ( Refitting )

The removing-refitting of the left rear sender unit is described below; the same operations should be carried out for the right one.

    Op. 4450B06 LEFT REAR WHEEL - R.R     Op. 7055B44 LEFT REAR WHEEL ARCH LINER - R.R1. Disconnect the electrical connection for the left rear tyre pressure sender unit.

	Description	Connector
1	Tyre inflation pressure control unit aerial	See P012 TYRE PRESSURE CONTROL UNIT ANTENNA

2. Using a suitable tool, drill the two rivets and remove the left rear tyre pressure sender unit. Refitting ( Removing ) - Place the left rear tyre pressure sender unit in position and secure it using new rivets.- Connect the electrical connection for the left rear tyre pressure sender unit.    Op. 7055B44 LEFT REAR WHEEL ARCH LINER - R.R    Op. 4450B06 LEFT REAR WHEEL - R.R - Carry out the self-learning procedure for the tyre pressure sender unit (LF sender unit) using the Examiner.