199002360 - 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R.

Removing ( Refitting ) - Open the fuse box cover in the engine compartment, remove fuse F30 (15A) and start the engine several times until the fuel pressure in the distribution manifold is expended.- Fit the fuse removed previously and close the fuse box cover.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R.1. Undo fastenings and remove air capacity chamber reinforcement.2. Disconnect the quick couplings, open the retaining clips and place the fuel input and outlet pipe aside.3. Disconnect the electrical connections for the injectors and move the wiring to one side.

	Description	Connector
3	Injector	See N070 INJECTOR

4. Disconnect the vacuum pipe from the fuel pressure regulator.5. Undo bolts (5a) and remove common rail (5b) with injectors. Refitting ( Removing ) - Place the single fuel manifold pipe complete with injectors in its housing and secure it using the bolts.- Connect the vacuum pipe to the fuel pressure regulator.- Refit the injector wiring in its seat and connect the electrical connections.- Refit the fuel input and output pipes in their seats and connect the quick couplings.- Place the air capacity chamber reinforcement in its housing and tighten the fastenings.- Close the fuel supply and return pipe retaining clips.    Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R.    Op. 1016A10 SOUND-PROOFING COVER - R.R