199002383 - 1088E10 RADIATOR COOLING FAN - R + R

Removing ( Refitting )     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.     Op. 1048B25 INTERMEDIATE RIGID PIPE BETWEEN HEAT EXCHANGER AND THROTTLE BODY - R R    Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R - Open the retaining clips and move the engine cooling system supply pipe to one side.1. Remove the waste gate valve from the fan support and move it to one side.
1. Disconnect the rapid connector and move the radiator coolant inlet pipe to one side.
1. Disconnect the resistor electrical connection.
DescriptionConnector
1Engine fan adjustment resistance - 1    See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1
2. Detach the electrical connection for the fan.
DescriptionConnector
2Fan motor    See N011 FAN MOTOR
1. Undo the bolts (1a) securing the fan (1b) and remove it from the clips on the right side of the radiator.
Refitting ( Removing ) - Place the fan back in its housing and fasten it to the radiator using the bolts and clips.- Secure the fan electrical connection.- Connect the resistor electrical connection.- Place the radiator coolant inlet pipe in position and connect the rapid connector, radiator side.- Place the waste gate valve in position.- Refit the engine cooling system feed pipe in its seat and do up the retaining clips.    Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 1048B25 INTERMEDIATE RIGID PIPE BETWEEN HEAT EXCHANGER AND THROTTLE BODY - R R    Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.