199002392 - 2710A20 WHEEL SIDE CONSTANT VELOCITY JOINT (ONE), L/H OR R/H - R + R WITH DRIVESHAFT REMOVED - INCLUDES BOOT REPLACEMENT
Removing
(
Refitting
)
- Position the driveshaft in a vice fitted with protective jaws.1. Remove the boot retaining bands and retract it.2. Remove the circlip (2a) and the release the constant velocity joint (2b).3. Remove the protective boot.
Refitting
(
Removing
)
- Wash the constant velocity joint components thoroughly and visually inspect that there are no signs of seizing or grooves on the balls or seats.- Position the new protective boot on the driveshaft.- Place the constant velocity joint back in its housing and secure it using the circlip.- Place the protective boot in position, then fill it with the recommended grease.| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STAR | NLGI 1-2 | 70 +/- 5 | 1.2 8v |
| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STAR | NLGI 1-2 | 85 | 1.4 8v1.4 16v |
| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STAR | NLGI 1-2 | 120 +/- 10 | 1.4 16v TJet |
| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STAR | NLGI 1-2 | 95 | 1.3 Multijet |
| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA STAR 325 | NLGI 2 | 100 +/- 10 | 1.9 Multijet |