199002438 - 7010A14 REAR SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT

1. If the adjustment is carried out after having removed the door, tighten the hinge bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Moving hinges on fixed	Bolt	M6	1.2 ÷ 1.8

    Op. 7010B14 REAR SIDE DOOR LOCK STRIKER - R.R - If necessary, tighten the bolts securing the hinges to the door and body.2. Unscrew opening limiter bolt (2a) and close the door temporarily to return link (2b). - Initially adjust the door within the door compartment. To do this, the bolts securing the hinges to the body must be loosened.    Op. 7040L48 FRONT AND REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R 1. Loosen the bolts (1a) securing hinges (1b) to the body.2. Adjust the door position by means of the slotted bolt holes until it is correctly aligned in the compartment.

It is advisable to work on one hinge at a time. The arrows indicate the possible movements for the adjustment.

3. After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Door hinges to body	Bolt	M8	2.9 ÷ 3.5

- Refit the components removed to access the hinge fixing bolts.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R     Op. 7040L48 FRONT AND REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.- If necessary, align the door with the wing and front door as follows.- Open the door.1. Loosen the bolts (1a) securing hinges (1b) to the body.2. Adjust the door position by means of the slotted bolt holes until it is correctly aligned with the wing and front door.

It is advisable to work on one hinge at a time. The arrows indicate the possible movements for the adjustment.

3. After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Hinges to door	Bolt	M8	2.9 ÷ 3.5

4. Remove link (4a) and tighten bolt (4b) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Door detent link (body side)	Bolt	M8	2.25 ÷ 2.75

- Refit and adjust the door striker.    Op. 7010B14 REAR SIDE DOOR LOCK STRIKER - R.R - Touch up the paint in the hinge half area.- Check that the stiker and the door lock are correctly matched and that the alignment is correct with the door closed.