7210E36 R.R. FRONT SIDE DOOR - Fiat - GRANDE PUNTO - eLearn

199002503 - 7210E36 R.R. FRONT SIDE DOOR

) - Lower the front window to the end of travel position.1. Undo the bolts (1a) fixing the limiter link (1b) to the body, then close the door momentarily so that the link is inside.2. Disconnect the electrical connection.

Description	Component
DRIVER''S FRONT DOOR JOIN	See D030 DRIVER'S FRONT DOOR COUPLING
PASSENGER FRONT DOOR JOIN	See D031 PASSENGER FRONT DOOR COUPLING

3. Undo the bolts for the hinges.4. Lift up the door and remove it.

Refitting ( Removing

) - Check that the door is not damaged.1. Place the door on the hinges.2. Tighten the bolts for the hinges to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Moving hinges on fixed	Bolt	M6	1.2 ÷ 1.8

3. Connect the electrical connection.- Check that the various consumers on the door are working.4. Pull out limiter (4a) out and tighten the bolt (4b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Door detent link (body side)	Bolt	M8	2.25 ÷ 2.75

- Check the door alignment and, if necessary, carry out: Op. 7005A14 FRONT SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT