199005159 - 1088D48 PIPE FROM ENGINE COOLANT RESERVOIR TO TURBOCHARGER - R.R.
Removing
(
Refitting
)
- Position the vehicle on a lift. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 0010T20 ENGINE COOLANT - CHANGE
1. Loosen the band and disconnect the hose from the three-way connector.2. Undo the nut securing the intermediate bracket.3. Release the connector and remove the pipe from the engine coolant tank to turbocharger.
Refitting
(
Removing
)
- Refit the pipe from engine coolant tank to turbocompressor in its housing and close the connector with new seals to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Turbocharger water supply pipe | Connector | M16 | 3.0 ÷ 3.6 | 1.4 16v TJet |
 | The pipe must be held firmly while tightening the connectors. Movements above 3° interfere with the connector seal |