2584272 - 1080B95 rear lambda probe with catalitic converter r r

Removing ( Refitting ) Position the vehicle on a lift.Disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.1. Disconnect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor on catalyzer	See K17 LAMBDA SENSOR ON CATALYZER ( ENGINE )

1. Unscrew and remove the rear lambda sensor from the catalytic converter. Refitting ( Removing ) Position the rear Lambda sensor and tighten it to the catalytic converter to the recommended torque.

	Fastening	Component	dia	Value(daNm)
-	-	REAR LAMBDA SENSOR TO CONVERTER	M18 x 1.5	(Manifold side) 4.5

Restore the electrical connection for the Lambda sensor.    Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.

	Description	Connector
-	Lambda sensor on catalyzer	See K17 LAMBDA SENSOR ON CATALYZER ( ENGINE )

Connect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

Remove the vehicle from the lift.