2584280 - 1080E20 active carbon filter for fuel vapours - r + r

Removing ( Refitting ) Place the car on a lift.Disconnect the battery negative terminal.1. Disconnect the pipe from the fuel vapour recovery solenoid.2. Disconnect the anti-evaporation pipe from the fuel vapour separator.
    Op. 4450B04 RIGHT FRONT WHEEL - R.R.1. Undo the fixing bolts (1a) and move the free side of the wheel housing dust shield (1b), to gain access to the charcoal filter.
1. Undo nuts (1a) and remove the active charcoal filter (1b).
Refitting ( Removing ) Fit the active charcoal filter and tighten the fixing nuts to torque.

FasteningComponentØValue(daNm)
-NutFUEL VAPOUR ACTIVE CARBON TRAP FILTERM60.9
Position the dust shield and tighten the fixing bolts.    Op. 4450B04 RIGHT FRONT WHEEL - R.R.Completely lower the lift.Connect the fittings on the pipes to the fuel vapour recovery solenoid valve and the fuel vapour separator.Connect the battery negative terminal.Remove the vehicle from the ramp.